> For the complete documentation index, see [llms.txt](https://docs.premium-positioning.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.premium-positioning.com/troubleshooting/rtk-fix-loss-on-job-sites.md).

# RTK fix loss on job sites

Why an RTK fix drops on construction and survey sites, how to tell whether the sky view, the data link or the correction source is at fault, and how to prevent and recover from fix loss mid-job.

An RTK fix can be lost in four places: the sky above the antenna, the receiver, the data link that carries the corrections, and the correction source itself. Each one leaves a different trace on the receiver, and each one has a different fix. On a large or busy site the first three cause most dropouts, and the correction source is the one an operator can do least about on the day.

### Questions by cause

* [Why does my RTK fix drop at the same spots on site?](https://docs.premium-positioning.com/troubleshooting/rtk-fix-loss-on-job-sites/fix-drops-at-the-same-spots.md)
* [Why does my RTK fix drop when mobile data is weak?](https://docs.premium-positioning.com/troubleshooting/rtk-fix-loss-on-job-sites/fix-drops-when-mobile-data-is-weak.md)
* [Why does every rover lose RTK corrections at the same time?](https://docs.premium-positioning.com/troubleshooting/rtk-fix-loss-on-job-sites/every-rover-loses-corrections-at-once.md)
* [Why does RTK accuracy drift as a machine moves across a large site?](https://docs.premium-positioning.com/troubleshooting/rtk-fix-loss-on-job-sites/accuracy-drifts-across-a-large-site.md)
* [Why does my receiver stay on float when corrections are arriving?](https://docs.premium-positioning.com/troubleshooting/rtk-fix-loss-on-job-sites/stays-on-float-with-corrections-arriving.md)
* [What should I do after losing an RTK fix mid-survey?](https://docs.premium-positioning.com/troubleshooting/rtk-fix-loss-on-job-sites/after-losing-a-fix-mid-survey.md)

### Causes by layer

| Layer             | What breaks                                                                                   | What the receiver shows                                                                                           |
| ----------------- | --------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------- |
| Sky view          | Buildings, cranes, steel, trees, cuts and machines block or reflect satellite signals.        | Satellite count and signal strength fall, DOP rises, and the solution drops to float at the same spots each time. |
| Receiver          | A low elevation mask, a tilted or moving antenna, or the GGA heartbeat switched off.          | Corrections arrive on time, but the fix is slow to come back or positions drift as the rover moves away.          |
| Data link         | Mobile coverage is weak across part of the site, or the SIM, controller or Wi-Fi link stalls. | The correction age climbs for several seconds before the fix is lost.                                             |
| Correction source | A correction network or its link to the caster goes down.                                     | Every rover on the same service loses corrections at the same moment, wherever it stands.                         |

Ionospheric activity sits outside all four layers. During a disturbed period, receivers on every correction service take longer to fix and lose it more easily, and the effect is strongest on services that rely on a single distant base station.

### Diagnosis by symptom

| Symptom                                                                                      | Most likely cause          | First check                                                                                                                                                                           |
| -------------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| The fix drops at the same places on every pass.                                              | Sky view                   | Note the spots and look up. Reroute through open ground, or measure those points from a better position.                                                                              |
| The correction age climbs before each drop.                                                  | Data link                  | Check the mobile signal at that spot and try a SIM on another carrier.                                                                                                                |
| Corrections arrive with a normal age, but the receiver stays on float across the whole site. | Geometry or the ionosphere | Check the DOP and the satellite count, wait a few minutes, and compare with a second rover.                                                                                           |
| One rover drops while another nearby holds its fix.                                          | That rover                 | Compare the settings, the antenna, the SIM and the firmware of the two units.                                                                                                         |
| Every rover drops at the same moment.                                                        | Correction source          | Note the time. In an Eligible Area the service moves to the next network. Elsewhere, contact support.                                                                                 |
| The fix holds, but positions drift as the rover moves across a long site.                    | GGA heartbeat              | Confirm position sending is on. See [Mountpoint selection and the GGA heartbeat](https://docs.premium-positioning.com/troubleshooting/mountpoint-selection-and-the-gga-heartbeat.md). |

A receiver that reports a fix while repeat measurements disagree has not lost its fix. That pattern points to a false fix or multipath, which [Inconsistent RTK accuracy on site](https://docs.premium-positioning.com/troubleshooting/inconsistent-rtk-accuracy-on-site.md) covers.

### Site planning

Construction sites change daily. A crane goes up, a stockpile grows, a steel frame rises, and a spot that held a clean fix last week loses it this week. Plan for that before the job starts.

* Check how many correction networks cover the site on the [coverage map](https://www.premium-positioning.com/coverage). Where two or more networks overlap, RTK Premium has smart failover available when a network drops. Where one network covers the site, a network outage stops corrections until it returns.
* Walk or drive the site with a phone or a receiver and check mobile data at the far corners, in cuts below grade and next to steel structures. Mobile coverage on a large site is rarely even.
* Consider a multi-operator SIM on sites where one carrier is weak. Our IoT SIMs are not tied to one mobile network.
* Set control and check points across the site, clear of reflective surfaces, so a crew can confirm a fix anywhere on the job within a short walk.
* Keep the GGA heartbeat on for machines and rovers that cover long distances. The network builds each correction for the position the receiver reports, so a stale position degrades the correction as the rover moves away.
* Check the correction age limit in the receiver. Many receivers hold a fix through a short gap in corrections and drop to float once the age passes that limit, so a limit set too short turns every brief data gap into a lost fix.
* Mount machine antennas clear of the cab, the boom and the counterweight, and check the mounting again after any repair.

### Recovery procedure

Stop measuring as soon as the status leaves fixed, read the correction age, the satellite count and the DOP, restore the fix in open sky, and check a known point before you resume. [What should I do after losing an RTK fix mid-survey?](https://docs.premium-positioning.com/troubleshooting/rtk-fix-loss-on-job-sites/after-losing-a-fix-mid-survey.md) sets out the full procedure and which points to re-measure.

Support runs on business days from 09:00 CET to 17:00 ET at <info@premium-positioning.com> or +31 85 0606 338.

### Related pages

* [What happens when a correction network goes down](https://docs.premium-positioning.com/learn/what-happens-when-a-correction-network-goes-down.md) explains smart failover and what the service level counts as unavailable.
* [RTK corrections troubleshooting](https://docs.premium-positioning.com/troubleshooting/rtk-corrections-troubleshooting.md) covers connection, sign-in and float problems step by step.
* [How to compare correction services](https://docs.premium-positioning.com/learn/how-to-compare-correction-services.md) lists the questions that separate services on a bad day.

### FAQ

Why does my RTK fix keep dropping on a construction site? Most dropouts on a construction site come from obstructions such as cranes, steel and stockpiles, or from weak mobile coverage in parts of the site. A drop at the same spot each time points to the sky view, and a correction age that climbs before the drop points to the data link.

How do I know whether the correction service caused the dropout? A correction source failure hits every rover on that service at the same moment. A drop on one rover, or at particular spots, starts at the site or the receiver.

Will RTK Premium keep my fix if a correction network goes down? In an Eligible Area, RTK Premium moves to the next network that covers your site, and the receiver may lose its fix briefly before fixing again. In an area served by one network, corrections stop until that network returns.

Can I keep measuring on a float solution? A float solution is typically accurate to decimetres rather than centimetres, so it is not fit for survey or stakeout work. Stop, restore the fix and check a known point before you continue.

How long should a receiver take to fix again after a dropout? In open sky with corrections arriving, a modern multi-constellation receiver usually fixes again within a minute. A longer wait points to the data link, poor geometry or ionospheric activity.

Does a better SIM help with RTK dropouts? It helps when the correction age climbs before the drop, because that pattern means the data link is failing. A multi-operator SIM is not tied to one mobile network, which matters on a site where one carrier is weak.

Last updated: 11 November 2026
