> For the complete documentation index, see [llms.txt](https://docs.premium-positioning.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.premium-positioning.com/rinexlab/base-reference-coordinates.md).

# Base reference coordinates

Set the reference coordinates of a base file in Rinexlab: why they matter in differential processing, the sources you can choose from, and why to declare their datum.

In differential processing, the coordinates of each base are held fixed. Any error in them goes straight into your result, so check them before you process.

{% embed url="<https://www.youtube.com/watch?v=n4FgngwS4L0>" %}
Set the reference coordinates of a base (video, about 70 s)
{% endembed %}

### Where the coordinates can come from

| Source              | When to use it                                                                                                                                                                                      |
| ------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| PPP result          | The most reliable choice when you have no surveyed coordinates: run a [static PPP](https://docs.premium-positioning.com/rinexlab/ppp.md) of the base itself, two hours or more, then use its result |
| Differential result | A static differential result of the base file against other bases                                                                                                                                   |
| Entered manually    | Known coordinates of the point, for example a surveyed mark: latitude, longitude and ellipsoidal height                                                                                             |
| RINEX header        | The position written by the receiver in the file header                                                                                                                                             |
| File position (SPP) | The approximate position computed by Rinexlab on import. Accurate to a few metres only: not suited as a reference                                                                                   |

**Default on import:** Rinexlab uses the position in the RINEX header when it lies within 1 km of its own approximate position, and the approximate position otherwise. A header position can be an approximate value: check it before processing.

### Set the coordinates on the file page

Open the base file and go to the card **Reference coordinates as base**. It shows the current value, its source and its datum.

* **Use PPP result of** *date* (or **Use differential result of** *date*): one click after a static job on the file.
* **Use the RINEX header**: if the header has no coordinates, Rinexlab says so. Use a PPP of the base or enter the coordinates by hand.
* **Use the SPP position**: the approximate position computed on import, only as a last resort.
* **Enter manually**: type the latitude, longitude and ellipsoidal height, choose the **Datum of these coordinates**, then click **Save reference**.

The next differential jobs that use this base take the new coordinates.

### Set the coordinates in the processing dialog

In **Process differential**, each base in the list shows where its reference comes from. Its **Reference** selector offers the file position, the RINEX header, the latest static PPP or differential results of that base, or a manual entry. Click **Apply** to set it.

A base without reference coordinates cannot be used: the dialog reports "A selected base has no reference coordinates".

### Declare the datum

Declaring the datum of the coordinates lets Rinexlab express your differential results in another datum. Coordinates from a national network are usually in the national datum, for example RGF93 for the French RGP. Coordinates from an SPP or a PPP result are in ITRF2020.

The differential result follows the frame of the base coordinates. An output datum can be chosen only when every base has a declared datum.

Last updated: 28 October 2026
