> For the complete documentation index, see [llms.txt](https://docs.premium-positioning.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.premium-positioning.com/guides/hi-target-qmini-a10-v90.md).

# Hi-Target Qmini A10 / V90

These steps connect a Hi-Target Qmini A10 / V90 to the Premium Positioning correction network over NTRIP, using Hi-Survey Road. They assume you already have your NTRIP credentials.

### Before you start

* Your NTRIP username and password, from your Premium Positioning welcome email or your account on the customer portal.
* Hi-Survey Road.
* A working internet connection on the controller or phone.
* A clear view of the sky at the point you are measuring.

### Network settings

These are the same for every Premium Positioning customer. Only your username and password are unique to you.

* Server or host: rtkpremium.xyz
* Port: 2101
* Mountpoint: COMMON
* Protocol: NTRIP

### Steps

1. Insert a SIM or prepare phone data: NTRIP comes over the internet, so the rover needs a connection. Either insert a working data SIM in the receiver, or make sure the phone/tablet running Hi-Survey Road has mobile data or Wi-Fi. You choose which in a later step.
2. Power on and pair the receiver: Switch on the Hi-Target receiver (Qmini A10 / V90). On the phone/tablet, enable Bluetooth. The entry point varies slightly by app version but is usually under the 'Device' menu in Hi-Survey Road.
3. Connect to the receiver in Hi-Survey Road: Open Hi-Survey Road and go to Device > Connect (some versions 'Communication' or a device/antenna icon). Choose Bluetooth, set manufacturer to Hi-Target and device type to your model, search, then select your receiver's serial number to connect. Wait for confirmation.
4. Open the Work Mode / Rover setup: Under the Device menu open 'Work Mode' ('Mode' or 'Work Style' in some versions) and choose 'Rover'. Create a new rover mode or edit the existing one.
5. Set the Data Link to network/internet: In the rover mode settings, find 'Data Link' and select the internet option. SIM in the receiver: choose 'Receiver Network' (a.k.a. 'Receiver Mobile Network'). Using the phone/tablet's data: choose 'PDA Network'. Avoid the radio/UHF options.
6. Choose the NTRIP protocol: Set the connection protocol to 'NTRIP'. Some versions label this 'CORS' or list 'NTRIP' as a protocol within a CORS-type connection. Select NTRIP so you can enter a caster address and mount point.
7. Enter the caster address and port: In the 'IP' (server/domain) field enter rtkpremium.xyz. In 'Port' enter 2101. The same for every customer. If your version splits domain and IP, use the domain field for rtkpremium.xyz.
8. Enter YOUR NTRIP username and password: In 'Username' (User/Account) and 'Password', type the personal NTRIP login from your welcome email - unique to your account; do not reuse anyone else's. If you don't have them, contact support.
9. Retrieve the mount point list (source table): Tap the control that fetches the streams - a refresh icon, 'Get', or the dropdown next to 'Mount Point'. Hi-Survey Road connects and downloads the source table. If nothing loads, recheck IP, port, username, password, and your internet.
10. Select the COMMON mount point: From the mount point list, select COMMON - the stream all Premium Positioning customers use. If you don't see it, confirm the source table loaded and your credentials are correct.
11. Apply and confirm the settings: Save the rover mode with OK / Apply / Confirm (label varies). Hi-Survey Road sends the settings to the receiver and starts requesting corrections over your chosen network.
12. Wait for a Fixed solution: Watch the solution status (top status bar or the satellite/solution indicator): Single → Float → Fixed (often green), usually within seconds to a couple of minutes outdoors with clear sky. 'Fixed' means full RTK accuracy. If it stays Single/Float, check internet signal, that COMMON is selected, and your credentials.

### If the fix will not hold

Menu/button names differ slightly between Hi-Survey Road versions (and the similar 'SurvY' app) - match the closest equivalent (Work Mode/Mode, Data Link/Datalink, Receiver Network/Receiver Mobile Network). Note: the standard Qmini A10 (CM) may have limited or no native NTRIP support in some app builds - if the network/NTRIP data-link option is missing, contact Premium Positioning to confirm your unit and firmware.

For more, see RTK corrections troubleshooting and Fix inconsistent RTK accuracy on site.

### Need help

Support is available 24/7. Include your receiver model, the mountpoint, the solution status, and the correction age when you get in touch.