> For the complete documentation index, see [llms.txt](https://docs.premium-positioning.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.premium-positioning.com/guides/drones-and-uavs/dji-matrice-4-enterprise-rtk.md).

# DJI Matrice 4 Enterprise RTK

Connect a DJI Matrice 4 Enterprise RTK or 4T to RTK Premium corrections using Custom Network RTK in DJI Pilot 2.

These steps connect a DJI Matrice 4 Enterprise RTK or 4T to the Premium Positioning correction network over NTRIP, using Custom Network RTK in DJI Pilot 2. They assume you already have your NTRIP credentials.

### Before you start

* Your NTRIP username and password, from your Premium Positioning welcome email or your account in the XYZ Platform.
* No account yet? Start a [14-day free trial](https://www.premium-positioning.com/start-14-day-free-trial?utm_source=docs\&utm_medium=referral\&utm_campaign=docs\&utm_content=dji-matrice-4-enterprise-rtk) to get your credentials.
* DJI Pilot 2 on the remote controller, with the aircraft linked to the controller.
* A working internet connection on the remote controller.
* No phone or hotspot in the field? If your controller or receiver takes a SIM, Premium Positioning [IoT SIMs](https://www.premium-positioning.com/products?utm_source=docs\&utm_medium=referral\&utm_campaign=docs\&utm_content=dji-matrice-4-enterprise-rtk#iot-sims) give it its own data connection.
* A clear view of the sky where you are flying.

### Network settings

These are the same for every Premium Positioning customer. Only your username and password are unique to you.

* Server or host: rtkpremium.xyz
* Port: 2101
* Mountpoint: COMMON
* Protocol: NTRIP

### Steps

1. Open the RTK settings: In DJI Pilot 2, open the aircraft's RTK settings.
2. Select Custom Network RTK: Set the service type to 'Custom Network RTK (NTRIP)'.
3. Enter the host and port: Enter rtkpremium.xyz as the host and 2101 as the port.
4. Enter your account and password: Enter your NTRIP username as the account, then your NTRIP password, exactly as they appear in your welcome email. They are case-sensitive and unique to your account.
5. Set the mountpoint: Enter COMMON as the mountpoint.
6. Confirm RTK FIX: Check that the HUD shows RTK 'FIX' before you start a mission.

### If the fix will not hold

Menu names differ between DJI Pilot 2 versions, so match the nearest equivalent on your controller. Keep the controller's internet connection stable through the flight. If the HUD stays below FIX, confirm that the service type is Custom Network RTK, then recheck the host, the port, the COMMON mountpoint and your credentials.

For more, see [RTK corrections troubleshooting](/troubleshooting/rtk-corrections-troubleshooting.md) and [Inconsistent RTK accuracy on site](/troubleshooting/inconsistent-rtk-accuracy-on-site.md).

### Need help

Support runs on business days from 09:00 CET to 17:00 ET. Contact us at <info@premium-positioning.com> or +31 85 0606 338, and include your receiver model, the mountpoint, the solution status, and the correction age.

Last updated: 11 October 2026