> For the complete documentation index, see [llms.txt](https://docs.premium-positioning.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.premium-positioning.com/guides/drones-and-uavs/dji-dock-2.md).

# DJI Dock 2

Connect DJI Dock 2 to RTK Premium corrections using Custom Network RTK.

These steps connect a DJI Dock 2 to the Premium Positioning correction network over NTRIP, using Custom Network RTK. They assume you already have your NTRIP credentials.

### Before you start

* Your NTRIP username and password, from your Premium Positioning welcome email or your account in the XYZ Platform.
* No account yet? Start a [14-day free trial](https://www.premium-positioning.com/start-14-day-free-trial?utm_source=docs\&utm_medium=referral\&utm_campaign=docs\&utm_content=dji-dock-2) to get your credentials.
* The Dock set up and online.
* Access to the Dock's network RTK settings, either through the remote controller during setup or through DJI's cloud platform, depending on your firmware.
* A clear view of the sky at the Dock site.

### Network settings

These are the same for every Premium Positioning customer. Only your username and password are unique to you.

* Server or host: rtkpremium.xyz
* Port: 2101
* Mountpoint: COMMON
* Protocol: NTRIP

### Steps

1. Open the Dock's network RTK settings: Depending on your firmware, open them during setup with the remote controller or through DJI's cloud platform.
2. Select Custom Network RTK: Choose 'Custom Network RTK' as the RTK service.
3. Enter the host and port: Enter rtkpremium.xyz as the host and 2101 as the port.
4. Enter your account and password: Enter your NTRIP username as the account, then your NTRIP password, exactly as they appear in your welcome email. They are case-sensitive and unique to your account.
5. Set the mountpoint: Enter COMMON as the mountpoint.
6. Confirm RTK FIX: Confirm that both the Dock and the aircraft reach RTK 'FIX' before you schedule operations.

### If the fix will not hold

The Dock's RTK configuration path depends on its firmware and on how you manage it in DJI's cloud platform, so match the nearest equivalent in your setup. The Dock needs a stable internet connection to receive corrections during operations. If the Dock or the aircraft stays below FIX, confirm that Custom Network RTK is selected, then recheck the host, the port, the COMMON mountpoint and your credentials.

For more, see [RTK corrections troubleshooting](/troubleshooting/rtk-corrections-troubleshooting.md) and [Inconsistent RTK accuracy on site](/troubleshooting/inconsistent-rtk-accuracy-on-site.md).

### Need help

Support runs on business days from 09:00 CET to 17:00 ET. Contact us at <info@premium-positioning.com> or +31 85 0606 338, and include your receiver model, the mountpoint, the solution status, and the correction age.

Last updated: 11 October 2026