DJI Agras T50 / T40 / T25

Connect a DJI Agras T50, T40 or T25 to RTK Premium corrections using Custom Network RTK.

These steps connect a DJI Agras T50, T40 or T25 to the Premium Positioning correction network over NTRIP, using Custom Network RTK in the DJI Agras app. They assume you already have your NTRIP credentials.

Before you start

• Your NTRIP username and password, from your Premium Positioning welcome email or your account in the XYZ Platform.

• No account yet? Start a 14-day free trial to get your credentials.

• The DJI Agras app on the remote controller, with the aircraft linked to the controller.

• A working internet connection on the remote controller.

• No phone or hotspot in the field? If your controller or receiver takes a SIM, Premium Positioning IoT SIMs give it its own data connection.

• A clear view of the sky where you are flying.

Network settings

These are the same for every Premium Positioning customer. Only your username and password are unique to you.

• Server or host: rtkpremium.xyz

• Port: 2101

• Mountpoint: COMMON

• Protocol: NTRIP

Steps

1. Link the aircraft and get the controller online: Power on the aircraft and the remote controller, make sure they are linked, and confirm the controller has internet.

2. Open the RTK settings: In the DJI Agras app, open the aircraft's RTK settings.

3. Select Custom Network RTK: Set the service type to 'Custom Network RTK (NTRIP)'.

4. Enter the host and port: Enter rtkpremium.xyz as the host and 2101 as the port.

5. Enter your account and password: Enter your NTRIP username in the 'Account' field and your NTRIP password in the 'Password' field, exactly as they appear in your welcome email. They are case-sensitive and unique to your account.

6. Set the mountpoint: Enter COMMON as the mountpoint.

7. Apply and wait for FIX: Apply the settings and wait for the RTK status to show 'FIX' before you operate.

If the fix will not hold

The DJI Agras app differs from DJI Pilot 2, and its menus change between firmware versions, so match the nearest equivalent on your controller. Keep the controller's internet connection stable for the whole operation. If the RTK status stays below FIX, confirm that the service type is Custom Network RTK, then recheck the host, the port, the COMMON mountpoint and your credentials.

For more, see RTK corrections troubleshooting and Inconsistent RTK accuracy on site.

Need help

Support runs on business days from 09:00 CET to 17:00 ET. Contact us at [e-mail] or [phone], and include your receiver model, the mountpoint, the solution status, and the correction age.