> For the complete documentation index, see [llms.txt](https://docs.premium-positioning.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.premium-positioning.com/guides/agriculture/case-ih-afs-pro-new-holland-intelliview.md).

# Case IH AFS Pro / New Holland IntelliView

Connect a Case IH AFS Pro or New Holland IntelliView display to RTK Premium corrections over NTRIP: caster settings and the steps to a fixed solution.

These steps connect a Case IH AFS Pro / New Holland IntelliView (FM-750 / NAV-900) to the Premium Positioning correction network over NTRIP, using AFS Pro / IntelliView. They assume you already have your NTRIP credentials.

### Before you start

* Your NTRIP username and password, from your Premium Positioning welcome email or your account in the XYZ Platform.
* No account yet? Start a [14-day free trial](https://www.premium-positioning.com/start-14-day-free-trial?utm_source=docs\&utm_medium=referral\&utm_campaign=docs\&utm_content=case-ih-afs-pro-new-holland-intelliview) to get your credentials.
* AFS Pro / IntelliView.
* A working internet connection on the controller or phone.
* No phone or hotspot in the field? If your controller or receiver takes a SIM, Premium Positioning [IoT SIMs](https://www.premium-positioning.com/products?utm_source=docs\&utm_medium=referral\&utm_campaign=docs\&utm_content=case-ih-afs-pro-new-holland-intelliview#iot-sims) give it its own data connection.
* A clear view of the sky at the point you are measuring.

### Network settings

These are the same for every Premium Positioning customer. Only your username and password are unique to you.

* Server or host: rtkpremium.xyz
* Port: 2101
* Mountpoint: COMMON
* Protocol: NTRIP

### Steps

1. Have your PP credentials and a data connection ready: Find the NTRIP username and password from your Premium Positioning welcome email - you'll type your own; we never supply them here. NTRIP corrections arrive over the internet, so the display needs a live data link: the machine's built-in cellular modem with an active SIM (e.g. DCM-300/Ag3000-class or the receiver's integrated modem) or a configured Wi-Fi connection. Confirm signal before continuing.
2. Power up and open the GPS / GNSS setup: Start the display (Case IH AFS Pro 700/1200 or New Holland IntelliView IV/12) and let the receiver power on. Open the guidance/GPS setup: on Precision-IQ-style screens tap the GPS/GNSS tile then the edit (pencil) or wrench icon; on the classic AFS Pro 700 menu, go to the Toolbox/GPS setup. Wording varies by display/firmware - look for the GPS/GNSS or 'Correction' setup.
3. Set the correction type to RTK: Find the Correction Type (or Correction Source) selector and choose RTK. On the AFS Pro 700 you press the Correction Type window, select RTK, and acknowledge the confirmation pop-up. This tells the receiver to expect cm-level corrections rather than a free/SBAS signal.
4. Choose Internet / NTRIP as the RTK delivery method: In the correction (RTK source / 'Correction Level' / delivery) options, select the Internet/NTRIP/Cellular option rather than Radio. Depending on display/receiver this may read 'Internet', 'NTRIP', 'Modem (DCM-300/Ag3000)', 'Cellular RTK', or 'VRS'. Pick the one that streams over the internet, not the radio option.
5. Confirm the display's internet connection: If prompted, select the data link for corrections: the internal cellular modem/SIM or a saved Wi-Fi network. Wait until the display shows it is online - NTRIP cannot connect without internet, so resolve any 'no connection / no SIM' warning before entering server details.
6. Enter the NTRIP server (caster) address: In the NTRIP server / caster address (or host/IP) field, enter: rtkpremium.xyz
7. Enter the port: In the Port (IP port) field, enter: 2101
8. Enter your NTRIP username and password: In the NTRIP Username and NTRIP Password fields, type YOUR OWN credentials from the welcome email exactly (case-sensitive). Do not share or guess - if you don't have them, contact Premium Positioning support.
9. Connect and load the source (mountpoint) table: Confirm/connect so the display contacts the caster. Once connected it retrieves the source table (the mountpoint list). If it fails here, re-check the server, port, and that your username/password are correct.
10. Select the COMMON mountpoint: From the mountpoint / data source list, choose: COMMON (Protocol: NTRIP). If the display asks you to type the mountpoint name instead of picking from a list, enter COMMON exactly.
11. Allow position reporting (GGA) for the network: Premium Positioning's network is a Network RTK / VRS-style service, so the caster needs your approximate position. If the display offers 'Send GGA', 'Send position to caster', or a VRS option, make sure it's enabled. Most CNH/Trimble displays do this automatically once a GPS position is available - if you see zero correction data, confirm this setting.
12. Save and let the receiver converge: Save/apply and return to the run/guidance screen. The receiver receives corrections and converges, usually within a few seconds up to a couple of minutes outdoors with clear sky.
13. Confirm RTK Fixed: Check the GPS/accuracy status indicator. You're set up when it reports RTK Fixed ('RTK', 'Fixed', or the highest-accuracy indicator) with a stable, low-error reading. If it stays at 'Float', 'Converging', or a lower mode, verify internet signal, the COMMON mountpoint, and your credentials, then allow more time under open sky.

### If the fix will not hold

Case IH AFS and New Holland IntelliView displays share Trimble-based correction software, so the NTRIP/Internet RTK workflow closely mirrors Trimble Precision-IQ and FmX/FM-750. Screen names, icons and the exact correction-source/internet wording differ by display model (AFS Pro 700 vs 1200, IntelliView IV vs 12) and firmware - follow the equivalent option. If you can't reach RTK Fixed: weak/absent cellular or Wi-Fi, a mistyped server/port/mountpoint, wrong/expired credentials, or GGA/VRS position reporting disabled.

For more, see [RTK corrections troubleshooting](/troubleshooting/rtk-corrections-troubleshooting.md) and [Inconsistent RTK accuracy on site](/troubleshooting/inconsistent-rtk-accuracy-on-site.md).

### FAQ

How do I connect a Case IH AFS Pro display to an NTRIP RTK service? You set the correction type to RTK, choose the Internet or NTRIP delivery option rather than Radio, and enter the caster details. The display needs a live data link first, through the machine's cellular modem with an active SIM or a configured Wi-Fi connection.

What are the NTRIP settings for a New Holland IntelliView on RTK Premium? Enter rtkpremium.xyz as the server, 2101 as the port and COMMON as the mountpoint, with your own username and password from the welcome email. The credentials are case-sensitive, so type them exactly.

Which RTK delivery option do I pick on an AFS Pro or IntelliView display? Choose the option that streams over the internet rather than the radio option. Depending on the display and receiver it may read Internet, NTRIP, Modem, Cellular RTK or VRS.

Why does my AFS Pro stay in Float or Converging? Check the internet signal, the COMMON mountpoint and your credentials, then allow more time under open sky. The caster also needs the machine's approximate position, so make sure Send GGA, Send position to caster or the VRS option is enabled where the display offers it.

Does the Case IH AFS Pro work with RTK Premium? It does. This guide covers Case IH AFS Pro and New Holland IntelliView displays with FM-750 or NAV-900 receivers, and you can test the connection on your own receiver with a 14-day free trial.

### Need help

Support runs on business days from 09:00 CET to 17:00 ET. Contact us at <info@premium-positioning.com> or +31 85 0606 338, and include your receiver model, the mountpoint, the solution status, and the correction age.

Last updated: 11 October 2026